Intertextuality In Films Essay Example | Topics and Well Written Essays - 2000 words

Intertextuality In Films - Essay Example The basic concept of intertextuality is that no text, much as it might like to appear so, is original and unique in itself. It is very useful concept; some might also say it is essential for literary studies. generally it is concerned with the cultural sign system. Intertextuality frequently occurs in popular media such as television shows, movies and even interactive video games. In these , intertextuality is often used to provide depth to the fictional reality portrayed in the medium, such as characters in one television show mentioning characters from another.intertextuality was first proposed by Julia Kristeva . According to her a single text that can consists of many texts or it is act of changing one set of sign into another. the use of intertextuality is perhaps the most useful and essential method of ensuring a successful show or film in today’s marketplace. as there are many source of entertainment available in today’s life apart from films, it is very useful f or modern and new directors to attract a particular audience. many directors and film makers refer to previous and old books, novels ,songs, history or remake many popular films, because the audience get familiar with the next story they see hear or read will remind them of some thing they have already experienced.

Memorandum For A Workplace Essay Example | Topics and Well Written Essays - 500 words

Memorandum For A Workplace - Essay Example Not many people take pleasure in receiving criticism, but participants concur that everybody can minimize its sting. To avoid this I as an HR consultant for this company is advising few suggestions by which we all can lessen its severity: Think about the starting place of Criticism. Is this a person whose estimation you esteem Is the intention to assist you improved, or only to make you sense like a bum Is the opponent conversant about the subject he or she is criticizing you on The third and the very most important concern is the increasing noise at workplace including dinning hall and washrooms. Keep in mind, sound is what we listen to. Noise is not a needed sound. The dissimilarity between sound and noise relies upon the listener and the conditions. Noise can promote irritation, strain and obstruction with speech communication which s the main apprehension in noisy offices. If you are conversing with your workmate and if you notice any one or all of the following change, it means that the workers in our office are facing listening problems: The above-mentioned three concerns are from now on being observed at strict measures. Not obeying them means going against the rules and regulation, for which extreme measures might be taken later on. If noticed, these are beneficial for all of us as successful employee's of this organization and as well gives a better impression to visitors. Furthermore, I as an HR Manag

Define and discuss sustainable development by focusing on a global Essay

Define and discuss sustainable development by focusing on a global issue - Essay Example Global warming is an issue that has to be looked into urgently in order to curb these effects before they even get worse than they are now. And in dealing with these issues, so many things have to be put into consideration. Will the measures taken be able to sustain this problem over the years to come and will the generations to come be able to put up with these measures? Without a doubt, it is evident that there exist symbiotic relationship and dependency between society (human beings) and natural resources. This relationship is what we refer to as â€Å"social metabolism† (Ghosh & Goswami, 2014, pg. 67). In any given society, natural recourses are what keep the economy moving. They are the backbone of any economy in society. Human beings depend on forests in so many ways. Forests are the sole source of wood used in construction of houses, commercial buildings; office and house hold furniture and so on. Literally in any building or place one walks into, rarely will one miss a â€Å"wood† aspect around them. Forests too are a good source of charcoal and firewood used at homes. Rural societies and some urbanites depend on forest for medicinal purposes since it is in these forests that you will find herbs and wild vegetation that contain medicinal value for curing various human and animal diseases. Forests are a good water catchment area and source of some rivers. Rivers, lakes and other water bodies provide human beings with water. â€Å"Water is life† no living thing in the world can survive without water. Water from rivers is used in irrigation and in other domestic uses by human beings. Water bodies are a source of habitat for creatures that benefit society in one way or the other (Ghosh & Goswami, 2014, pg. 68). Fish is a good source of healthy food for humans. Other than being used for home purpose, most societies living around fresh water bodies have built their economy through the sale of fish, both locally and to other

The issue of ecology Essay Example for Free

The issue of ecology Essay The issue of ecology as a transnational issue has become highlighted with the intensification of world trade. As such, it becomes a global responsibility and a consideration in developing trade policies. As the primary governing body of international trade, the World Trade Organization (WTO) has been one of the pioneers in equating environmental responsibility with trade (Deal, 2002). At the same time there, has been regional efforts to standardize environmental laws to mitigate the impact of development in shared environs as illustrated by the efforts of the European Union (EU), North Atlantic Free Trade Agreement (NAFTA) and the Association of South East Asian Nations (ASEAN) (Sampson, 1998). One of the efforts made by the WTO is the development of the Kyoto Protocol which is aiming to mitigate environmental issue particularly global warming by establishing a trade system for emissions. However, there has been a difficulty in the implementation of the regulation because of varying views on the policies as well as difficulty in monitoring emissions. At the same time, there have been some issues regarding the institution of multilateral agreements that are contradicting or undermining the Kyoto Protocol or the status of most favored nations (MFN) (Brewer, 2004). Focus For WTO members, the use of energy tax adjustments could have significant implications. The issue raises difficult environmental, trade policy issues, economic issues. It also raise the internalization of environmental costs and the â€Å"polluter pays† principle, the effects on trade competitiveness and relationship between the multilateral environmental agreements and WTO agreements. The main issue that whether Article III: 2 first provisions of the 1994 GATT or the General Agreement of Tariffs and Trade ponders the use of border tax adjustment (BTA) on â€Å"final† products for taxes on the manufacture of inputs. Albeit the decision in Superfund case, discussed in the latter of this section, the question will turn on a proper analysis of the taxes â€Å"applied, directly or indirectly, to â€Å"the like products to be compared, as opposed to the overall â€Å"fiscal burden† on producers from taxes on inputs. The Kyoto Protocol and the General Agreement of Tariffs and Trade In December 1997, the Kyoto Protocol to the UN Framework Convention was adopted. Under Kyoto Protocol, only Annex 1 countries are subject to legally binding emissions reduction commitments for the commitment period 2008-2012 in post-2000 scenario. Annex 1 parties or developed countries have to meet individual emission reduction targets listed in Annex B of the Protocol. Developing countries or non-Annex 1 parties are not subject to specific emission reduction commitments. Though over 120 countries have ratified the Protocol but the Protocol has yet to come into force. U. S. A and other developed countries have to date indicated an intention not to ratify the Protocol. Another contention is with regards to Article 1, II, VI and VII of the GATT and their potential implication with border tax adjustments. Further, energy tax adjustments may be challengeable under Article XXIII: 1 [b] of 1994. Finally, Panel approach to WTO-consistency will be governed by the reasonableness of the specific measure and its appreciation of the wider international implications. Energy tax adjustments as per Article III: 2 first sentences could offer potentially broad scope for countries to apply energy tax adjustments as disguised barriers to trade. Such results would do little to serve the objectives of either the WTO multilateral trading system or the international response to climatic change. Border Tax Adjustment Border Tax Adjustment [BTA] is a tax levied on imported products to adjust or compensate for taxes levied on domestic product. The main goal of BTA is to ensure trade neutrality of domestic taxation and thereby safeguarding competitive equality between imported and domestic goods. BTA is not necessarily levied at the border and imports may be taxed at the point of sale or consumption. Sales tax, consumption taxes or excise duties, value added taxes are examples of domestic taxes that might be subject to BTA. Likewise, a BTA on imported energy products such as imported natural gas or diesel fuel and other fossil fuels for domestic excise duties would fall within this group. Though the taxes on energy have been levied by governments for fiscal purpose for long time, now there has been a change in trend to levy â€Å"energy tax† mainly for â€Å"environmental† purpose. Energy tax is being levied on energy inputs such as coal ,electricity or gasoline which in turn calculated in value terms , or on the basis of its content of carbon of fossil fuels which is also known as â€Å"carbon taxes†. As of now, there exists no border tax adjustment scheme in place for taxes on energy inputs employed in the production of final products. However, European and other high energy taxing governments are contemplating to introduce such measures in near future due to the pressure exerted by environmental and industry groups. But there are increasing pressures from environmental groups to enforce strictly trade measures to enforce Kyoto Protocol objectives against non-signatories like United States. These environment groups regard the U. S. rejection of the Kyoto protocol is unfair as it places the European business at a disadvantage. They argue that Europe has the right to penalize the U. S goods for the pollution they cause under â€Å"Polluters pay â€Å"policy. Cases for Consideration A BTA can be applied on final goods or on inputs used in the production process. An example is the border tax adjustment on imports of aluminum’s for taxes on energy used in the production process as taxes are being levied on embodied energy in the final good that are adjusted, as opposed to taxes on the final goods itself. These measures are regarded as contentious with linkage to WTO trade and environmental debate. Albeit the Appellate body’s findings in the United States – Shrimp dispute, the exercise of trade measures applied on the basis of process and production methods (PPM) – in this case embodied taxes, carbon or energy –remains highly contentious. BTA for domestic taxes on energy inputs also raise significant equity and sovereignty concerns on the use of trade measures to inflict domestic environmental or taxation systems on other countries. Super Fund The case is against levy of superfund tax by U. S. A on petrochemicals and other chemicals and inputs when imported and sold in U. S and no tax is levied when it is exported out of U. S. U. S claimed that the aim of the tax was to compensate the cleaning up cost of hazardous waste sites and towards public health programs. When an importer fails to provide the details of input which he imported, then a penalty tax rate of 5 % was imposed. The GATT panel ruled that the tax on imported substance was a tax ‘directly imposed on products’ and hence eligible for border tax adjustments. The panel held the US super tax would be consistent with the Article III: 2 first sentence as long as it is equivalent to tax borne by the like domestic substances. The U. S direction to provide the information of inputs may make such information available to trade competitors and would have a real effect in discouraging trade. In this case, it appeared that neither the GATT Panel nor the parties sought to distinguish between the tax applied to the imported products, the like domestic products or the chemical products used in the production of the like domestic products. The Panel seemed to accept the US argument that the imported product and that the like domestic product was subject to the same â€Å"fiscal burden†.

Bless Me, Ultima Essay -- essays research papers

Antonio is Alienated   Ã‚  Ã‚  Ã‚  Ã‚  I believe that in the novel Bless Me, Ultima Antonio is an alienated individual. He doesn’t seem to act like any of the other kids his age and has been through so much more then they have. For example, Antonio is torn between making his mother happy and becoming a priest, or making his father happy and becoming a cowboy type figure. He also has experienced a lot of death in his life to people he cared deeply about. I believe that Antonio is alienated because he has the mind of an adult, he is the only one who can talk to Ultima, and he can see the future. Oddly, Antonio is the only one who understands Ultima. For example, in the beginning of the book Antonio shook Ultima’s hand and he could sense the power of a whirlwind pass through hi...

Sporting Goods

What promotional activities might Prince use to reach the following segments: (a) recreational players and (b) junior players? The first thing that Prince needs to do is find different ways to appeal to both generation gaps in the tennis industry. It is important to keep all the Baby Boomer customers and still grasp the attention of the younger generation. In efforts to get the attention of the junior players, Prince utilizes social media sites like face book and twitter as one way of promoting to junior players.The use of Prince teaching Pro Program is excellent for targeting recreational players! Prince’s website directly reaches tennis players of all ages giving them information on products, tennis tips, and the latest news from the industry. Prince teaching pro program can be used to target the junior players more because it gives demo rackets, equipment information, and the latest product information better assisting them with developing their skills and understanding whi ch equipment could better their skills and help them become more experienced tennis players.In efforts to attract the attention of both junior and recreational players, Prince holds local â€Å"Prince Demo Events†. This event allows potential customers an opportunity to experience hands on different prince rackets, grips, and strings. What might Prince do to help it gain distribution and sales in (a) mass merchandisers like Target and Wal-Mart and (b) specialty tennis shops?To gain distribution and sales in large chains, Prince uses co-op advertising for in-store circulars, point of purchase displays, and consumer brochures assisting the retailers set up of Prince Products in their sports (tennis) section of the stores. For small specialty tennis shops, Prince issues a supply of demo rackets, detailed catalogs, equipment fixtures, string and racket guides, racket hooks, and tennis shelves. He also issues â€Å"player standees†, which are large life size cut outs of pro fessional tennis players to these small specialty shops.

Bunker Gear Fabric

Bunker gear or turnout gear is the protective clothing used by a firefighter in fighting fires and during rescue operations. This gear is called turnouts because when not being used, they are kept standing by to be put on swiftly by ‘turning out' the pants over the boots. It is a requirement for firefighters to be able to put on all of the gear in no time, and in this set up, all they have to do is to step into the boots and pull the pants up. This solidly insulated gear is worn to shield the firefighter's body from the extreme heat of a fire.Approximately, structural turnouts will break down at 650 °C (1200 °F). A full turnout gear may weigh more or less 30kg aside from other extra tools to be carried. It is consisted of â€Å"a coat, pants and suspenders, leather or rubber waterproof boots, a hood, a strong helmet with eye protection, gloves, a belt, and SCBA (Self Contained Breathing Apparatus)† (www. sccfd. org). Turnout pants protects the lower part of the firef ighter's body. It is made of fire-resistant materials and they are easy to put on with Velcro and snaps.Turnout pants have side pockets for tools, gloves, and other necessary equipment. In order for the firefighters to be seen at nigh, these pants also have reflective stripes on the bottom. Turnout coat's outside liner is made of exclusive fire resistant fabrics. The coat has various liners for extra protection. One of these liners acts as a moisture barrier, it prevents outside moisture to reach the firefighter. Another part of the liner protects firefighters from the exposure to thermal heat. Pockets are also available for extra equipment such as gloves, radio, wrenches and other tools.Around its neck is a Nomex hood. Except for the face, it covers practically the entire head of the firefighter. The turnout boots are made of rubber. Aside from steel to covering, these have a steel shank in sole to protect firefighters from sharp or pointed objects. In order to be put on quickly, t hese boots have handles at the top. Wearing of this protective gear is a requirement for all firefighters approaching a seat of the fire or entering a hazardous area as stated in the NFPA 1971 Code or the Protective Clothing for Structural Fire Fighting.Looking back in history, firefighters' garment was consisted of a cotton or wool shirt, heavy wool trousers, and a heavy wool tunic, which was sometimes worn over with rubber slickers. Wool was used because of its ability to protect a firefighter from heat and cold, and also because of its resistance to mild flame and water. Their gloves were the traditional leather gloves for laborers. It was only after the World War II when the standards for firefighter protective gears were issued by a number of organizations like the National Fire Protection Association or the NFPA.According to the NFPA 1971 Standard on Protective Clothing for Structural Firefighting, turnout gears must be composed of three layers: the outer layer must be made fr om flame-resistant fabric â€Å"that would not be destroyed through charring, separating, or melting when exposed to 500 °F for a five-minute period;† the second layer must â€Å"prevent moisture from penetrating through to the wearer;† and the third layer must â€Å"provide thermal insulation from radiant, conducted, and convective heat† (http://www. pbs. org). Firefighters' gloves should also be resistant to heat, flame, liquids, vapor, and sharp objects.The boots should also withstand flame, puncture, heat, electrical current, and abrasion. Further advancements in firefighters' turnout materials came up during the 80s. The 500 °F temperature resistance limit of the outer shell was raised to around 1,200 °F. The other layer also allowed the firefighters to â€Å"release moisture from inside the gear,† and the material used was a fire-resistant fabric. Being self-extinguishing, this material will not continue to burn once it is out of contact with a fire. Bunker gears are made out of synthetic fibers such as Aramid and Polybenzimidazoles (PBI).These synthetic fibers are polymers. A polymer is a substance with high molecular weight made up of a large number of smaller molecules. These molecules, called monomers, react together in hundreds, or even millions of times. The properties of the polymers are determined by the molecular shape variations that resulted from the reactions. These could be in the form of long, straight chains or branched. It is through their average molecular weight that their sizes are expressed. Polymers with higher molecular weights have the higher strength. They also usually have high melting or boiling points.Filaments made of synthetic polymer fibers have excellent strength because these fibers can be prepared with regular structures that allow the chains to pack together tightly. Another advantage of synthetic polymers is that they are stronger and much lighter than steel, making them the choice for bunker gears and bullet proof vests. Aramids are synthetic polyamides, a class of polymer for textile fibers. It has a carbon-based backbone which contains aromatic rings. Fabrics made of aramids are strong and flame resistant even at extreme temperatures because of the stability of the fiber's aromatic structures and their conjugated amide linkages.Polyamides are manufactured through step-growth polymerization. In this process, â€Å"monomers with two reactive ends join to form dimers (two â€Å"parts† joined together), then â€Å"trimers† (three â€Å"parts†), and so on. However, since each of the newly formed oligomers (short chains containing only a few parts) also has two reactive ends, they can join together; so a dimer and a trimer would form a pentamer (five repeating â€Å"parts†)† (www. fibersource. com). The aramid fibers, on the other hand, are produced through Wet Spinning process.The fiber-forming materials are dissolved in a solvent, which is usually hydrogen sulfate (H2SO4), and spun using a spinneret. Aside from firefighting gears, aramid fabrics are also useful for friction products such as brake pads, clutch pads or seals and gaskets, because synthetic materials made from this fabric does not ignite or melt. Aramid fibers are also flexible, lightweight, resistant to organic solvents and fuels, and good insulators of electricity. Aramids are more popularly known with the names Kevlar and Nomex. The blend of these two aramids is used in manufacturing turnout gears.